Module Hot Melt Equipment Banner Module Hot Melt Equipment Banner Module Hot Melt Equipment Banner Module Hot Melt Equipment Banner
Universal Systems SE Catalog About Unviersal Systems SE Contact Unviersal Systems SE Unviersal Systems SE Homepage
Module Hot Melt Equipment Banner Module Hot Melt Equipment Banner Module Hot Melt Equipment Banner Module Hot Melt Equipment Banner
MANUFACTURER OF HOT MELT SYSTEMS
Hot Melt Units Pneumatic Pumps Heated Hoses Pneumatic Guns Nozzles
 
 

Modules

Modules  
Universal Systems has improved an industry standard with its Probilt series of NM200 and NM 20 Gun Modules. Designed to out perform and out last all other modules in the industry, Universal Systems Extrusion Modules will operate under the most adverse conditions. All Universal Systems Modules are engineered and designed for high performance and durability to meet the operational demands of today’s manufacturing. We understand the importance of limited downtime on today’s high-speed production lines; therefore we’ve engineered our modules to last for millions and millions of cycles, making them cost effective and easy to replace.
Modules Section of Catalog

Why Universal Systems Modules?

 

Long-life hydraulic seals for insured durability.
Air-open, spring close operation for superior cut-off and bead uniformity.
Needle tip and valve seat design ensures clean cutoff at the nozzle.
Factory-set stroke eliminates the need for operator adjustment for a consistent glue pattern.
Operating speeds that exceed 3000 plus cycles per minute dependant on adhesive viscosity and solenoid performance rating.
Modules can be replaced in minutes by simply removing two socket-head screws.
Modules can be used with a wide range of hot melt packaging adhesives.
Compatible with a wide variety of nozzles for design flexibility.
Precisely manufactured for un-compromised compatibility with existing equipment.
 
 
PROBILT MODULES
 
modules_for_hot_melt_adhesive_systems
 
PROBILT 200 SERIES STANDARD MODULE
 
  ITEM # DESCRIPTION

  2400 STANDARD ADJUSTABLE PROBILT SERIES 200 MODULE (QTY 1-9)
  2410 STANDARD ADJUSTABLE PROBILT SERIES 200 MODULE (QTY 10+)
  6011 VITON O-RING FOR NM200 & PROBILT SERIES MODULES, US011C
     
PROBILT 200 SERIES REDUCED CAVITY MODULE
     
  ITEM # DESCRIPTION

  2308 REDUCED CAVITY ADJUSTABLE MODULE .008DIA.
  2312 REDUCED CAVITY ADJUSTABLE MODULE .012DIA.
  2316 REDUCED CAVITY ADJUSTABLE MODULE .016DIA.
  2320 REDUCED CAVITY ADJUSTABLE MODULE .020DIA.
  6011 VITON O-RING FOR NM200 & PROBILT SERIES MODULES, US011C
     
PROBILT 200 SERIES ZERO CAVITY E-Z MICRO ADJUST MODULE
     
  ITEM # DESCRIPTION

  2508 ZERO CAVITY E-Z MICRO ADJUST MODULE .008DIA.
  2512 ZERO CAVITY E-Z MICRO ADJUST MODULE .012DIA.
  2516 ZERO CAVITY E-Z MICRO ADJUST MODULE .016DIA.
  2520 ZERO CAVITY E-Z  MICRO ADJUST MODULE .020DIA.
     
PROBILT 200 SERIES ZERO CAVITY CASE SEALER ADJUSTABLE MODULE
     
  ITEM # DESCRIPTION

  2500 ZERO CAVITY CASE SEALER ADJUSTABLE MODULE .012DIA.
  6011 VITON O-RING FOR NM200 & PROBILT SERIES MODULES, US011C
     
PROBILT 200 SERIES SWIRL PATTERN MODULE
     
  ITEM # DESCRIPTION

  2600 SWIRL PATTERN ADJUSTABLE MODULE
  2601 SWIRL PATTERN E-Z MICRO ADJUST MODULE
  6011 VITON O-RING FOR NM200 & PROBILT SERIES MODULES, US011C
   
PROBILT 200 SERIES WEAVE PATTERN MODULE
     
  ITEM # DESCRIPTION

  2700 WEAVE PATTERN ADJUSTABLE MODULE
  2701 WEAVE PATTERN E-Z MICRO ADJUST MODULE
  6011 VITON O-RING FOR NM200 & PROBILT SERIES MODULES, US011C
     
PROBILT 200 SERIES PLUG IN MODULE
     
  ITEM # DESCRIPTION

  2800 PLUG IN ADJUSTABLE MODULE
  2801 PLUG IN E-Z MICRO ADJUST MODULE
  6011 VITON O-RING FOR NM200 & PROBILT SERIES MODULES, US011C
     
PROBILT 20 SERIES MODULE
     
  ITEM # DESCRIPTION

  2100 STANDARD NON-ADJUSTABLE PROBILT SERIES 20 MODULE
  2101 STANDARD E-Z MICRO ADJUST PROBILT SERIES 20 MODULE
  6010 VITON O-RING FOR NM20 SERIES MODULE, US010C
     
MODULE PARTS
 
modules_parts_for_hot_melt_adhesive_systems
 
MISCELLANEOUS PARTS
     
  ITEM # DESCRIPTION

  2000 20 SERIES 1/4 20 X 2 SCREW (10PK)
  2002 200 SERIES SEAL REPAIR KIT
  2003 200 SERIES SEAL REPAIR KIT (10PK)
  2034 200 SERIES LOAD SCREW
  2004 200 SERIES LOAD SCREW LOCK NUT
  2007 200 SERIES 10-32 SOCKET CAP SCREW (10PK)
  2009 200 SERIES REPAIR KIT WITH SEAT & PISTON
  2031 200 SERIES REPAIR KIT WITH SEAT & PISTON (10PK)
  2011 200 SERIES AIR ADJUSTER CAP
  2012 200 SERIES MODULE BODY
  2014 .42 X .5 COMPRESSION SPRING (10PK)
  2016 REDUCED CAVITY NOZZLE ASSY. WITH NEEDLE .008DIA.
  2017 REDUCED CAVITY NOZZLE ASSY. WITH NEEDLE .012DIA.
  2018 REDUCED CAVITY NOZZLE ASSY. WITH NEEDLE .016DIA.
  2019 REDUCED CAVITY NOZZLE ASSY. WITH NEEDLE .020DIA.
  2021 10/32 X 1.25 SOCKET HEAD SCREW (10PK)
  2022 1.146 X .36 X .65 COMPRESSION SPRING (10PK)
  2023 6-32 X .625 FILLISTER SCREW (10PK)
  2025 8/32 X .375 SLOTTED PAN HEAD SCREW (10PK)
  2026 8/32 X .375 SLOTTED FILLISTER SCREW (10PK)
  2027 8-32 X .375 SLOTTED OVAL SCREW (10PK)
  2028 4/40 X .187 PAN HEAD SCREW (10PK)
  2032 REPAIR KIT FOR UNIVERSAL SYSTEMS 2600 MODULE
  2033 REPAIR KIT FOR UNIVERSAL SYSTEMS 2600 MODULE (10PK)

Hot Melt Units | Pneumatic Pumps | Heated Hoses | Pneumatic Guns | Modules | Nozzles | Pattern Controllers

Hot Melt Equipment Catalog | Equipment Rebuilding

Hot Melt Equipment Catalog – PDF File
Hot Melt Equipment Master Parts List – PDF File
Nordson® Cross Reference for Probilt Series Hot Melt Equipment – PDF File

About Universal Systems SE | Contact Universal Systems SE | Home Page | Site Map

1085 SW 15th Avenue, Bldg E ● Delray Beach, FL ● 33444
Toll Free (800) 848-5018 ● Fax (800) 848-5078
Info@UniversalSystemsSE.com
©2014 Universal Systems SE, Inc.